FACT¢â 3 with 2 M QZ |
|
|
|
Key Features: |
| 26 MHz - 18 GHz Performance Range |
| Full Compliance Testing for Radiated Emissions: - ANSI C63.4 - FCC Parts 15 & 18 - EN 50147-2 - CISPR 11/EN50011 - CISPR 16/EN550016 - CISPR 22/EN550022 - VCCI V-3/2004.04 - SAE J551 - SAE J1113 |
| Full Compliance Testing for Radiated Immunity: - IEC 61000-4-3/EN61000-4-3 - SAE J551, SAE J-1113 |
| Eligible for FCC 3 Meter Class B Facility Filing |
| Available as a Turnkey Package: - Chamber, Tower, Turntable, Antennas, Instrumentation and Software |
ETS-Lindgren¡¯s FACT¢â 3 Chambers offer semi-anechoic radiated emissions (RE) and fully anechoic radiated immunity (RI) compliance test capability for most international EMC compliance regulations.
The chamber's small overall size results from the use of hybrid absorber and ferrite tile, which require less volumetric space than traditional absorbers. ETS-Lindgren FACT¢â 3 chambers will fit in many existing structures, yet are large enough to perform 4 meter antenna scans above the ground plane. When installed with ETS-Lindgren¡¯s LoPro¢â or EuroPro¢â turntables, pit excavations for motor assemblies are eliminated.
Radiated Emissions Testing ETS-Lindgren¡¯s FACT¢â3 chambers are designed to provide customers with more standardized solutions for different quiet zone diameters and performance options. This will provide users more flexibility to choose which solution works best for their individual needs. The available quiet zone sizes are available up to 2.0 meters in diameter. ETS-Lindgren¡¯ Fact 3 chambers can be used to perform full compliance testing for ANSI C63.4, FCC parts 15 & 18, EN 50147-2, CISPR 11/EN55011, CISPR 16/EN55016, CISPR 22/EN55022, VCCI V-3/2003.04, SAE J551 and SAE J1113.
ETS-Lindgren guarantees that the performance of Normalized Site Attenuation (NSA) testing according to ANSI C63.4, is ¡¾ 4.0 dB for STANDARD chamber, ¡¾ 3.5 dB for STANDARD PLUS chamber and ¡¾ 3.0 dB for PREMIUM chamber over the frequency range of 30 MHz to 1 GHz. The guaranteed performance for frequency range of 1 GHZ to 18 GHz is ¡¾ 3.0, regardless which performance option is selected below 1 GHz.
Radiated Immunity Testing ETS-Lindgren¡¯s FACT 3 chambers can also be used to perform full compliance testing for IEC 61000-4-3/EN61000-4-3 and SAE J-1113 requirements.
At FACT 3 range lengths, field uniformity of - 6 dB is achieved in the test aperture over the frequency range of 26 MHz to 18 GHz. The test aperture is a vertical plane 1.5 meter x 1.5 meter at an elevation of .8m to 2.3m above the ground plane, following the field uniformity test procedure of IEC 61000-4-3.
Additionally, FerroSorb¢â can safely withstand continuous field intensity of up to 200 V/m and intermittent field intensity of up to 500 V/m. This safely exceeds the field intensity requirements of most commercial RI tests.
Turnkey Systems ETS-Lindgren is an integrated manufacturer producing such well-known brands as Rantec absorber, RayProof Series 81 and Euroshield shielding and RF doors, Holaday Probes, EMCO antennas, towers, turntables, and test accessories. All of our products are designed to work together for maximum efficiency and performance.
In addtion to providing performance, our "Total Solution, Single Source"¢â approach simplifies complex decisions and gives you peace of mind with a single source of responsibility.
|
|
Standard Configuration |
Four waveguide vents, 30.48 cm x 30.48 cm (12" x 12")
Design and fabricate RF-shielded enclosure, interior nominal shield-to-shield dimensions of 8.5 m L x 6.1 m W x 5.4 m H, (28 ft L x 20ft W x 19ft H) includes 15.24 cm (6") raised floor
One threaded brass ground stud 1.27 cm (0.5") diameter x 12.7 cm (5") long
One fiber optic penetration kit
One 3.81 cm (1.5") pipe penetration with flange nuts and cap
Two "N" type connectors
Six corner-mounted light fixtures with floodlights (electrical distribution not included)
Three 2 x 30 amp, 60 Hz power-line filters for lights and EUT (wiring not included)
Shield test per MIL-STD-285, one frequency test at 1 GHz
Two access hatches in raised floor, 45.72 cm x 45.72 cm (18" x 18")
3.18 mm (1/8") vinyl floor tile
Dielectric vapor barrier and masonite underlayment
Raised reflective ground plane, 15.24 cm (6")
One door maintenance kit
One single-leaf, Series 201, recessed contact mechanism (RCM), manually operated, RF-shielded door, 1.22 m x 2.13 m (4' x 7') clear opening
One connector panel, 15.24 cm x 91.44 cm (6" x 36") clear opening
Sixteen pieces of ETS-Lindgren's Rantec brand EHP-18PCL pyramidal absorber on an area of the floor for radiated immunity testing from 1 GHz up to 40 GHz
Seismic Structural Package
ETS-Lindgren's EMCO brand Model 2075-2 MiniMastTM electrically powered air polarization boom tower with 20 m cable and fiber optic feed-through
ETS-Lindgren's EMCO brand Model 2090 dual device controller
ETS-Lindgren's EMCO brand Model 2087-2.03 electrically powered, 2 m turntable with cable and fiber optic feed-through
Normalized site attenuation test per ANSI C63.4-2000 from 30 MHz to 1 GHz (optional test from 1 to 40 GHz)
One RF-shielded penetration for airline to MiniMastTM (compressed air is responsibility of customer)
Installation of the enclosure and absorber
Guaranteed performance and a five-year limited warranty; one-year warranty on doors, filters and moving parts; two-year warranty on optional ETS-Lindgren's EMCO brand equipment.
Sixteen pieces of ETS-Lindgren's Rantec brand FT-100c ferrite tile panels for an area of the floor for radiated immunity testing up to 1 GHz
Light reflective covers for FS-400 and FS-600 absorber
ETS-Ranted FS-400, hybrid absorber full coverage of end-wall behind turntable and specular region of ceiling
ETS-Lindgren's Rantec brand FS-600, hybrid absorber on specular )'critical") regions of side-walls
ETS-Lindgren's Rantec brand FT-1500 for full coverage of transmit end-wall
ETS-Lindgren's Rantec brand FT-1500 on non-critical areas of side-walls and ceiling
Field uniformity calibration per IEC 61000-4-3 from 26 MHz to 1 GHz (optional test from 1 - 40 GHz
|
|
Options |
Shielded control room, 3.05 m x 3.05m x 2.44 m (10' x 10' x 8')
Fire detection and suppression system
Electrical distribution
Ferrite tile mounted on rolling carts
Low profile door sill for Series 201 door
Other door options available
CCTV monitoring system
Heating, ventilating, and air conditioning (HVAC) system
Seismic structural design calculations and certification
Intercom system
Normalized Site Attenuation measurement up to 18 GHz
Field uniformity measurement up to 18 GHz
Preparation of FCC filing paperwork (class B) | |
Specifications |
ABSORBER TYPE |
INTERNAL WORKING AREA |
SHIELD ROOM INNER DIM |
OVERALL STRUCTURE DIM |
FT-1500 ferrite tile FS-600FS-400 FT-100c ferrite panels EHP-18CL Absorber |
(L) 8.12 m .... 26.7 ft
(W) 6.1 m .... 20.0 ft
(H) 5.48 m .... 18.0 ft
|
(L) 8.53 m 28.0 ft
(W) 6.1 m 20.0 ft
(H) 5.64 m 18.5 ft
|
(L) 9.04 m 29.66 ft
(W) 6.71 m 22.01 ft
(H) 6.12 m 20.07 ft
|
FREQUENCY RANGE |
APPLICABLE STANDARDS |
IEC 1000-4-3 FIELD UNIFORMITY |
ANSI C63.4 NORMALIZED SITE ATTENUATION |
26 MHz to 40 GHz |
ANSI C63.4-2000 CISPR 11, 16, 22 EN50147-2 EN55016 EN55022 EN610000-4-3 FCC Class B parts 15 & 18 GR-1089-Core ISO 9000 MIL-STD 461E VCCI V3-/97.04 (1997) |
26MHz-18GHz 1.5 m x 1.5m +6dB 75% 16 points |
30 MHz - 40 GHz | | |
|
|