Better than +/- 6 dB Measurement Uncertainty Using Correlation Algorithm
Available as a Turnkey with Instrumentation
The SpaceSaverTM PC can be used for making pre-compliance radiated emissions measurements over the frequency range of 30 MHz to 3 GHz. Measurement uncertainty can be as good as +/- 6 dB in the chamber's 1.5 meter diameter quiet zone reference site source and correlation algorithm. A LoProTM 1.2 meter turntable and Model 2090 Positioning Controller are included. With signal generator and high power RF amplifier, the SpaceSaver PC can be readily converted into a RF shielded radiated immunity (RI) test lab for pre-compliant device radiated immunity debugging tests.
The most compact of the SpaceSaver series, the PC is installed as a stand-alone structure and does not require any attachments to the parent building. Benefiting from its small size, the SpaceSaver PC can be placed in a lab or office area too small for a full-sized chamber, but close to the engineering function. The modular panel design simplifies construction and permits dismantling when relocation is required.
Standard Configuration
PreCompliance Measurement Kit
EMC32 EMC Test Software
ESPI Precompliance Test Receiver/Spectrum Analyzer
Positioning Controller
LoProTM Turntable
Installation of the enclosure and absorber
Four corner-mounted light fixtures with floodlights (electrical distribution not included)
Two "N" type connectors
Four 2 x 30 amp, 60 Hz power-line filters for lights and EUT (wiring not included)
Two waveguide vents, 30.48 cm x 30.48 cm (12' x 12') in the ceiling
One single-leaf, Series 201, recessed contact mechanism (RCM), manually operated, RF-sheilded door, .91 m x 2.13 m (3' x 7') clear opening
Two Connector panels, 6" x 24"
Design and fabricate RF-shielded enclosure, interior nominal shield-to-shield dimensions of 6 m L x 3 m W x 2.4 m H, (20 L x 10' W x 8' H)