Meets -6 dB Reflectivity Loss From 80 MHz - 250 MHz
The MIL-STD 461E high performance RF-shielded chamber is designed primarily for radiated emissions testing in accordance with MIL-STD-461DE or prior versions. The chamber can be used for conducted emissions, conducted immunity, radiated emissions, and radiated immunity testing.
Chamber performance is achieved by using Rantec high-performance EMC-24PCL absorber in a Series 81 modular shielded room. EMC-24PCL absorber is specifically designed for MIL-STD testing applications, and meets specified reflectivity requirements.
Standard Configuration
Four incandescent corner-mounted light fixtures
Six mil polyethelene vapor barrier
3.18 mm (1/8") thick dielectric floor underlay
Two waveguide vents, 60.96 cm x 30.48 cm (24" x 12")
Two UL-listed 2 x 30 amp, 60 Hz power-line filters; one for lights, one for power to EUT (wiring and electrical distribution not included)
Two connector panels, (6" x 24")
Design and fabricate RF-shielded enclosure, interior nominal shield-to-shield dimensions of 6 m L x 6 m W x 3.7 m H, (20 L x 20' W x 12' H) includes 30 cm (12") raised floor
One pipe penetration
Guaranteed performance and a five-year limited warranty; one-year warranty on doors, filters and moving parts; two year warranty on optional ETS-Lindgren's EMCO brand equipment
One single-leaf, Series 201, recessed contact mechanism (RCM), manually operated, RF-shielded door, 1.22 m x 2.13 m (4' x 7') clear opening
One door maintenance kit
3.18 mm (1/8") vinyl floor tile
One threaded brass ground stud 1.27 cm (0.5") diameter x 12.7 cm (5") long
Installation of the enclosure and absorber
Shield test per MIL-STD-285, one frequency test at 1 GHz
Rantec EMC-24PCL pyramidal 24" absorber on the chamber end walls and partial areas of the ceiling and side walls
Options
Shielded control room, 3.05 m x 3.05m x 2.44 m (10' x 10' x 8')
Fire detection and suppression system
Low profile door sill for Series 201 door
Other door options available
CCTV monitoring system
Intercom system
Specifications
ABSORBER TYPE
INTERNAL WORKING AREA
SHIELD ROOM INNER DIM
OVERALL STRUCTURE DIM
EMC-24PCL
(L) 4.92 m .... 16.0 ft
(W) 4.92 m .... 16.0 ft
(H) 3.08 m .... 10.0 ft
(L) 6.12 m 20.0 ft
(W) 6.12 m 20.0 ft
(H) 3.68 m 12.0 ft
(L) 6.38 m 20.71 ft
(W) 6.38 m 20.71 ft
(H) 3.95 m 12.83 ft