EMCO's Model 1062-1.2 is a low profile, manually operated, wood topped turntable designed for pre-scan measurements.
ETS-Lindgren's Model 1062 Pre-Scan Turntable is perfect for performing pre-scans, where coupling with the ground plane is not required. With a 450 kg. (1000 lb) distributed load rating, the Model 1062 can support most EUTs that would be used with this diameter turntable. Manually powered, the turntable can be rotated as needed, and held in position with a lock screw.
The Model 1062 is constructed of a FormicaTM surface bonded to a marine grade plywood core. A thumbscrew at the edge of the turntable locks the turntable in position as needed.
Standard Configuration
Turntable assembly
Physical Specifications
DIAMETER
NOMINAL HEIGHT
DISTRIBUTED LOAD RATING
TOP CONSTRUCTION
1.22 m 4 ft
7.6 cm cm 3 in in
kg1 lb
wood one piece
1 Distributed Load Rating: applies when load is evenly distributed on top; no point loads under .19 sq m (2 sq ft) should exceed 100 kg (220 lb); and not over 28.5 kg (63 lbs) should be applied to a 45A¡Æ segment at the table outer edge.